1 / 2
Rated by 28 customers
Put the strip up first, then work through the drawer at the bench one knife at a time.
Your order Free delivery on every order
EdgeGlide Club: members save 20% on every order. No fees, no lock-in.
Put the strip up first, then work through the drawer at the bench one knife at a time.
1 x TurnBox Knife Sharpener; 1 x SteelHold Magnetic Knife Strip; 1 x RustAway Eraser Block.
Free & Fast Delivery on every order, Australia-wide. 30-day money-back guarantee: use it for 30 days and if it is not for you, email us for a refund. This is on top of your rights under the Australian Consumer Law.
Join free with your email. Members pay $274.90 for the Complete Knife Care Bundle instead of $343.90, and save 20% on every order after that. No fees, no lock-in, leave any time.
Blunt knives, rust spots and a drawer where everything knocks together. You want the whole lot sorted at once: knives that cut cleanly, blades that look looked after, and a proper spot to keep them. And you want to do it yourself at home.
This set is the TurnBox Knife Sharpener, the SteelHold Magnetic Knife Strip and the RustAway Eraser Block. Rub off any spots with the RustAway, sharpen on the TurnBox with the angle set for you, then hang each knife on the magnetic strip where you can see it.
Clean, sharpen, hang. By the end, every knife is on the wall and cutting cleanly. Keep the block and sharpener handy for touch-ups. It comes with our 30-day money-back guarantee.
Most people start with a blunt knife. EdgeGlide suits anyone who wants every knife in the place cutting like new, not just one.
Fixed-angle sharpening holds the blade at a set angle for you, so you do not need to keep a steady freehand angle like you would on a whetstone. The TurnBox Knife Sharpener uses pre-set slots in a beech base to hold ceramic rods in a V shape, and you draw the knife down the rods. The rods take you from coarser shaping through to finer honing and store inside the base when you are done.
A cheap pull-through tears up your edge, and a whetstone takes real practice and a steady wrist to get right. Our fixed-angle TurnBox holds the ceramic rods at preset 20 and 25 degree bevels, so the angle is set for you. No guessing, no wrecked edges and no skill to learn. You draw the blade down and the tool does the thinking.
The TurnBox holds four ceramic rods locked at preset angles inside a hardwood base, 20 degrees for fillet and pocket knives and 25 degrees for standard kitchen knives. You pick the slot for your knife type and draw the blade straight down, and the base holds the correct angle for you. Because the geometry is fixed by the tool and not your wrist, you cannot guess it wrong and you cannot wreck a good blade.
It handles standard kitchen knives at the 25 degree slot, and fillet or fishing knives and pocket knives at the 20 degree slot. It is compact enough to store in a cutlery drawer or take on a trip. It is built for quick touch-up and maintenance sharpening on everyday blades. It is not made for steels harder than 64 HRC, serrated edges, or fully re-profiling a knife that has lost its edge.
No. Cheap pull-through sharpeners drag your edge across coarse carbide and tear metal off. The TurnBox uses ceramic rods set at a fixed 20 or 25 degree angle, so you draw the blade down at the correct angle every time and take off only what you need. It suits kitchen knives, pocket knives and fillet knives. Only very hard steels above 64 HRC and serrated edges are out of scope.
The strip has real N52 neodymium magnets set behind a wood contact face. Neodymium is the strongest common magnet grade, so it holds a heavy chef's knife or cleaver firmly without slipping. Blades sit against wood rather than bare metal, so the edge and finish are never scraped. Just bring the blade close and the magnet pulls it into place.
Rated by 28 customers
$343.90Club price $274.90
